
Orca Vanir Flex – Maximal komfort för Swimrun
Orca Vanir Flex är den mest bekväma våtdräkten i Orcas Swimrun-sortiment. Designad för att ge optimal rörelsefrihet både i vattnet och på land, kombinerar den högelastiska material med en smart konstruktion. Den främre dragkedjan gör det enkelt att justera ventilationen och ger extra komfort under både simning och löpning. Oavsett om du tävlar eller tränar, är Vanir Flex det perfekta valet för swimrun-entusiaster som söker prestanda utan att kompromissa med komforten.
Elasticitet
Orca Vanir Flex är en välbalanserad våtdräkt som passar alla typer av lopp och swimrunner. Kombinationen av Yamamoto 39-neopren och högpresterande tyger ger den perfekta mixen av flexibilitet och rörelsefrihet, både i vatten och på land.
Varaktighet
Med ett slitstarkt DuraSkin 2-yttertyg på den nedre bålen är Vanir Flex designad för att tåla tuffa utmaningar. Materialet skyddar dräkten mot slitage från utrustning och hinder, vilket ökar dess livslängd och säkerställer att du kan njuta av din swimrun-upplevelse längre.
Lagring
Den praktiska bakfickan (15x12 cm) ger utrymme för att förvara grundläggande säkerhetsutrustning – perfekt för både träning och tävling.
Sammansättning:
Neopren: 95 % | Polyamid (Nylon): 5 %
Vanir Flex – skapad för swimrun-atleter som kräver både komfort och prestanda!
Vad är min storlek?
Size | Chest | Height | Weight |
---|---|---|---|
XS | 78 - 83 | 144 - 160 | 46 - 53 |
S | 83 - 89 | 157 - 167 | 54 - 61 |
M | 89 - 94 | 165 - 177 | 60 - 67 |
L | 94 - 99 | 172 - 185 | 66 - 74 |
XL | 99 - 104 | 177 - 189 | 73 - 79 |
Cleaning
Neoprene can be damaged by excess salt or other chemicals such as chlorine if used in swimming pools. We recommend washing your wetsuit with plenty of water after each use. A small amount of neutral pH soap can be used and then rinsed out afterwards.
Once clean, make sure prevent it from holding onto too much moisture. Air dry it outside or in a ventilated indoor space, somewhere without direct exposure to sunlight as this can damage the materials.
Storage
Storing your wetsuit properly keeps the materials and seams from creasing and being stretched for long periods of time. It also prevents the material from wrinkling, which can affect both the wetsuit's durability and appearance.
The best way to store a wetsuit is to hang it draped over a hanger from its waist, so that the most delicate areas such as the shoulders and arms do not have any kind of tension on them.
For wetsuits with very flexible shoulders (Apex Flex or Apex Flow), it is important not to place them on a hanger from the shoulder area, as this will degrade the elasticity over time. For the rest of the models, a wide hanger can be used, as long as the wetsuit is not strained in the shoulder or neck area.
Recommendations for use
1) If your suit has Velcro, avoid contact between the Velcro and the inner lining of the wetsuit, as it will damage the fibers in the material. Keep the Velcro covered with the provided fabric patch or make sure that the Velcro is closed, so that the rough part of the Velcro does not damage the inside of your suit.
2) For all suits, especially those made with neoprene, be careful not to damage the neoprene material with your nails when putting on or taking off the suit, as this type of damage is not covered by our warranty policy.
3) Triathlon and open water suits have been designed specifically for swimming. We cannot guarantee correct functioning of the wetsuits for other activities. Any damage to the wetsuit resulting from use in activities other than swimming is not covered by our warranty policy.
4) Avoid leaning on or coming into contact with any surfaces (especially rough ones) while wearing your wetsuit.